zortrax M200 Quick Start Guide

Z- SUITE SOFTWARE INSTALLATION
You need a model in .stl file format to print it on Zortrax
M200 3D printer. Most CAD and 3D modeling software
allows you to convert 3D files to this format. To prepare
a file for 3D printing (in the z-code format) install the
Z- Suite Software on your computer. The latest version is
available to download from www.zortrax.com. To install
Z-Suite Software, you need a serial number, which you will
get with the printer.
Z- FIRMWARE UPDATE
To enjoy the highest print quality it is important to have
the latest version of firmware. Always update the printer’s
firmware when a new version is available. News about
Z-Suite changelogs can be found on www.zortrax.com
and you can also subscribe to Z-Newsletter – to be up-to-
date with all updates. The latest version of Z-Firmware
is available to download from www.zortrax.com/down-
loads. To update the firmware save its latest version onto
the SD Card (Update.bin file), insert the SD Card into
the printer and run the device. Z-Firmware will update
automatically.
M200 PRINTER ENVIRONMENT
9

zortrax M200 Specifications

General

Build Volume	200 x 200 x 180 mm
Layer Resolution	90-400 microns
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Connectivity	SD card
Software	Z-Suite
Operating System	Windows, macOS
Frame	Aluminum
Printing Speed	up to 100 mm/s
Heated Bed	Yes
Bed Temperature	up to 110°C
Nozzle Temperature	up to 380°C
Power Consumption	300 W
Technology	FDM
Supported Materials	Z-ABS, Z-ULTRAT, Z-HIPS, Z-GLASS, Z-PETG, Z-ESD
Power Supply	100-240 V, 50/60 Hz
Dimensions	345 x 360 x 430 mm
Weight	13 kg