zortrax M200 X/Y Axes Replacement

Table Of Content
Unplugging the Power Cable 3
Unplugging the Extruder Cable 4
Unscrewing the Axis Block Covers, part 1 5
Unscrewing the Axis Block Covers, part 2 6
Extruder Removal 7
Unscrewing the Belt Tensioners 8
Loosening the Screws on the Self-Aligning Bearings 9
Unscrewing the Self-Aligning Bearings 10
Axis Removal 11
Axis Assembly 12
Securing the Self-Aligning Bearings 13
Tightening the Screws on the Self-Aligning Bearings 14
Extruder Installation 15
Securing the Axis Block Covers, part 1 16
Securing the Axis Block Covers, part 2 17
Securing the Belt Tensioners 18
Tightening the Screws on the Axis Block Covers 19
Tightening the Self-Aligning Bearing Screws 20

zortrax M200 Specifications

General

Build Volume	200 x 200 x 180 mm
Layer Resolution	90-400 microns
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Connectivity	SD card
Software	Z-Suite
Operating System	Windows, macOS
Frame	Aluminum
Printing Speed	up to 100 mm/s
Heated Bed	Yes
Bed Temperature	up to 110°C
Nozzle Temperature	up to 380°C
Power Consumption	300 W
Technology	FDM
Supported Materials	Z-ABS, Z-ULTRAT, Z-HIPS, Z-GLASS, Z-PETG, Z-ESD
Power Supply	100-240 V, 50/60 Hz
Dimensions	345 x 360 x 430 mm
Weight	13 kg