zortrax M300 Plus Replacement

Unloading the Material
To unload the material, open the Tools menu and select “Material” and “Unload
material.” Wait until the extruder heats up and select “Continue” to confirm.
To complete the procedure, remove the material from the endstop placed at the back of
the printer.

zortrax M300 Plus Specifications

General

Build Volume	300 x 300 x 300 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Connectivity	Wi-Fi, Ethernet, USB
Operating System	Windows, macOS
Software	Z-SUITE
Supported File Types	.stl, .obj, .dxf, .3mf
Layer Resolution	0.05 - 0.3 mm
Supported Materials	Z-ASA Pro, Z-ESD, Z-GLASS, Z-HIPS, Z-PETG
Operating Temperature	15 - 30 °C
Power Supply	110/240 V AC
Weight	40 kg