22
ZOTAC ZBOX nano
Installing drivers and software
Installing an operating system
The ZOTAC ZBOX nano does not ship with an operating system preinstalled. An
operating system must be installed before the ZOTAC ZBOX nano can be used. The
following operating systems are supported:
• Windows XP
• Windows Vista
• Windows 7
Follow the instructions below to install an operating system:
1. Insert disk for operating system into the optical drive.
2. Wait for the ZOTAC ZBOX nano to boot from the disk.
3. Follow the onscreen directions to install the operating system.
4. Install system drivers to gain full functionality of the ZOTAC ZBOX nano
hardware and features.
Note: For best compatibility, please only use the eSATA or USB 2.0 ports as the OS
installation source drive connection.
Installing system drivers
Before you can use the full features of the ZOTAC ZBOX nano, the system drivers
must be installed. The following types of operating systems are supported by the
ZOTAC ZBOX nano driver DVD:
• Windows XP
• Windows Vista
• Windows 7
Follow the instructions below to install the system drivers:
1. Insert the ZOTAC ZBOX nano driver DVD. If
autorun is enabled, the driver installation
main menu will show up automatically.
Windows Vista may ask for further
conrmation, please click “Allow” or “OK”
to proceed.
Note: If autorun is disabled, you can click the le
Launch.EXE to bring up the driver installation main
menu.
2. The following drivers are available on the
DVD:
• AMD Chipset driver
• Realtek HD Audio Driver
• Realtek Network Driver
To Next Page
Loading...
Need help?
General
