02418V10 • 11.08.2016/DC • 1-7
General
1.5 General
The ZSK Automatic bobbin winder is suitable to fi ll automatically empty bobbins
with corresponding yarns. It is conceived in a way that both small cones and
big cones can be used to fi ll the bobbins. Bobbins in different sizes can be fi lled
(Filling only one bobbin size each time - no mixed fi lling of different sized
bobbins!)
The handling of the bobbin winder is easy and does not call for any special
training.
It has to be guaranteed that the automatic bobbin winder is con-
nected to a corresponding power supply (see type label on the
rear side).
Before connecting it to the wall socket, the rocker switch (rear
side) has to be in position ‘O’ (OFF).
Type label
Rocker switch OFF (Rear side)
To Next Page
Loading...