7
Connecting to Your Device
Using Wi-Fi
1. Power on your device.
2. Ensure that your computer or other client devices have enabled
Wi-Fi, and search for available wireless networks.
NOTE: Refer to your Wi-Fi-enabled client device manual for
further details on how to search for wireless networks. If you use a
computer, you need to set your computer to obtain an IP address
automatically.
3. Select the Wi-Fi name (SSID) of your device, and click Connect.
4. Enter the Wi-Fi password if necessary, and click OK.
NOTE: Refer to the chapter Getting to Know the Wi-Fi SSID
and Password to get the default Wi-Fi SSID and password.
5. Wait until the client device is connected to your device successfully.
Using a USB
Type-C Cable
1. Connect a computer to your device with a USB Type-C cable.
2. Power on your device. The operating system detects and identifies
new hardware, and automatically installs the software.
3. Wait until the computer is connected to your device successfully.
To Next Page
Loading...
