Need help?Do you have a question about the Zte ZXV10 W615 and is the answer not in the manual?
General| Wireless Standards | 802.11b/g/n |
|---|---|
| Frequency Band | 2.4 GHz |
| Security | WEP, WPA, WPA2 |
| Antenna | External |
| Humidity | 5% to 95% (non-condensing) |
Step-by-step guide on how to log in to the device's web interface for configuration.
Steps to configure broadband connections for both Fit AP and Fat AP modes.
Configuration of basic wireless parameters for network cards, including SSID and RF settings.
How to configure Service Set Identifiers (SSIDs), including hiding and isolation.
Configuration of wireless security protocols like WPA-PSK, WPA-EAP, WEP, and WAPI.
Manages IP address allocation, subnet settings, and DHCP server configuration.
Configuration of static and dynamic routing for network traffic flow.
How to configure firewall levels and enable anti-hacking protection.
How to filter IP addresses and ports to control network access.
How to filter network access by specifying MAC addresses.
How to configure Quality of Service (QoS) parameters, classification, and congestion management.
How to manage user accounts, including changing passwords and setting privileges.
Performing system operations like rebooting, firmware upgrades, and configuration backup/restore.
Setting the AP mode and name for the wireless access point.
To Next Page
