ZXV10 W615 User Manual
Confidential and Proprietary Information of ZTE CORPORATION 15
• Network card 1: works at 2.4 GHz, and supports 802.11b, 802.11g, and
802.11n.
• Network card 2: works at 5.8 GHz, and supports 802.11a and 802.11n.
Steps
1. Select Network > WLAN > Basic. The following page is displayed.
2. Confiture the basic parameters of WLAN.
If Network Card 1 is selected, see the previous figure for the configuration
page. For a description of the parameters, refer to the following table.
Parameter Description
Network Card Select network card 1.
Enable Wireless RF Enables or disables the wireless RF function
Enable Isolation Enables or disables the SSID isolation function.
Mode Supports IEEE 802.11b Only, IEEE 802.11g Only, IEEE
802.11n Only, Mixed(802.11b+802.11g),
Mixed(802 .11g+802.11n),and
Mixed(802.11b+802.11g+802.11n).
To Next Page
Loading...
