ZXV10 W615 User Manual
62 Confidential and Proprietary Information of ZTE CORPORATION
Parameter Description
Traffic Class Specifies the traffic type ranging from 0 to 255.
Flow Label Specifies the flow flag ranging from 0 to 1048575.
802.1p Re-marking The re-marking value of 802.1p processing priority. The
value range is 0 to 7 (0 means that the priority is not set).
A greater value indicates a higher priority.
DSCP Re-marking Specifies the re-marking value of DSCP. The value range
is 0 to 63.
Queue Index Specifies the corresponding management queue number
that ranges from 1 to 8.
3. Click Submit.
—END OF STEPS—
Configuring Congestion Management
This section describes how to configure congestion management.
Context
The default congestion management algorithm is SP. The default queue is
Queue 8. Congestion management is enabled by default.
Steps
1. Select Application > QoS > Queue Management. The following page is
displayed.
To Next Page
Loading...
