ZXV10 W615 User Manual
Confidential and Proprietary Information of ZTE CORPORATION 63
2. Configure the parameters. Refer to the following table.
Parameter Description
Enable Enables or disables the configuration function of QoS
queues.
Queue Index Includes Queue 1- Queue 8. Queue 8 is enabled by
default.
3. Click the icon of the queue to be modified. Select or clear the Enable
check box.
4. Click Modify.
—END OF STEPS—
ConfiguringSNTP
This section describes how to configure time management to achieve time
synchronization with the time server.
Steps
1. Select Application > SNTP. The following page is displayed.
To Next Page
Loading...
