Zte ZXV10 W615 - Checking Associated Devices

ZXV10 W615 User Manual
Confidential and Proprietary Information of ZTE CORPORATION 29
Parameter Description
 Disabled: no SSID access is controlled. It is the default
setting.
 Block: prohibits the access of devices with specified
MAC addresses.
 Permit: permits the access of devices with specified
MAC addresses.
MAC Address Specifies the MAC address of the equipment to be
controlled.
Delete
Click to delete the corresponding item of control
channel.
3. Click Add.
—END OF STEPS—
Checking Associated Devices
This section describes how to check the detailed information of the devices
associated with the SSID.
Steps
1. Select Network > WLAN > Associated Devices. The following page is
displayed.