Zte ZXV10 W615 - Management Configuration; SNMPv1;v2 c Configuration; SNMPv3 Security Management

ZXV10 W615 User Manual
Confidential and Proprietary Information of ZTE CORPORATION 69
Parameter Description
Trap Server Port Enter the port number of the Trap server within
the range 1–65535. The default value is 162.
Read Community The default password is public.
Write Community The default password is private.
3. Click Submit.
—END OF STEPS—
SNMPv3SecurityManagement(USM)
Managing SNMPv3 Users
This section describes how to manage SNMPv3 users.
Steps
1. Select Administration > SNMPv3 Security (USM) > SNMPv3 Users.
The following page is displayed.
2. Configure the parameters. Refer to the following table.
Parameter Description
Security Name User name.
Authentication Protocol The options are None, MD5, and SHA.