Zte ZXV10 W615 - Addresses Management; Managing Addresses

ZXV10 W615 User Manual
Confidential and Proprietary Information of ZTE CORPORATION 41
AddressesManagement
Managing Addresses
The DHCP start IP address and the DHCP end IP address should be within the
subnet of LAN IP.
Steps
1. Select Nework > LAN > Address Management. The following page is
displayed.
2. Configure the parameters. Refer to the following table.
Parameter Description
LAN IP Address IP address of LAN group (interface subnet). The default
IP address is 192.168.1.1.