Zte ZXV10 W615 - Log Management

ZXV10 W615 User Manual
82 Confidential and Proprietary Information of ZTE CORPORATION
in the square box on the page.
—END OF STEPS—
AccessPointManagement
Setting the AP Mode
This section describes to set the AP mode.
Steps
1. Select Administration > AP Management > AP Mode. The following
page is displayed.
2. Set the AP mode, Fat or Fit, based on the actual requirement.
Notes:
After the AP mode is changed, the device restarts automatically.
3. Click Submit.
—END OF STEPS—
Setting an AP Name
This section describes how to set an AP name.
Steps
1. Select Administration > AP Management > AP Name. The following
page is displayed.