Zte ZXV10 W615 - Configuring WAN Connection (Fat AP); Configuring IGMP Snooping

ZXV10 W615 User Manual
Confidential and Proprietary Information of ZTE CORPORATION 65
Configuring WAN Connection (Fat AP)
This section describes how to configure WAN connection.
Steps
The AP mode of the device is Fat.
1. Select Application > IGMP > WAN Proxy. The following page is
displayed.
2. Select IGD.WD1.WCD1.WCIP1 or WANBRIDGE1 as the WAN
connection.
3. Click Add.
—END OF STEPS—
Configuring IGMP Snooping
This section describes how to configure IGMP snooping.
Steps
1. Select Application > IGMP > IGMP Snooping. The following page is
displayed.