ZXV10 W615 User Manual
Confidential and Proprietary Information of ZTE CORPORATION 55
SettingtheALGSwitch(FatAP)
This section describes how to configure the ALG switch.
Steps
The AP mode of the device is Fat.
1. Select Security > ALG. The following page is displayed.
2. Refer to the following table to confirm the protocol name for NAT
conversion. Open/close the related ALG switches.
Parameter Description
FTP ALG Open/close the NAT conversion switch for the FTP protocol.
TFTP ALG Open/close the NAT conversion switch for the TFTP protocol.
SIP ALG Open/close the NAT conversion switch for the SIP protocol.
L2TP ALG Open/close the NAT conversion switch for the L2TP protocol.
H323 ALG Open/close the NAT conversion switch for the H323 protocol.
RTSP ALG Open/close the NAT conversion switch for the RTSP protocol.
PPTP ALG Open/close the NAT conversion switch for the PPTP protocol.
IPSEC ALG Open/close the NAT conversion switch for the PSEC protocol.
3. Click Submit.
—END OF STEPS—
To Next Page
Loading...
