EasyManua.ls Logo

Zte ZXV10 W615 - MAC Filtering Setup

Zte ZXV10 W615
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ZXV10 W615 User Manual
Confidential and Proprietary Information of ZTE CORPORATION 51
Parameter Description
Address
End Destination IP
Address
End IP address of the destination.
Start source port Port number of the start source (LAN side) address.
End source port Port number of the end source (LAN side) address.
Start Destination port Port number of the start destination source (LAN side)
address.
End Destination port Port number of the end destination source (LAN side)
address.
Ingress The availbable options are LAN,
IGD.WD1.WCD1.WCIP1, or blank. It is blank by default,
which refers to any mode.
Egress The availbable options are LAN,
IGD.WD1.WCD1.WCIP1 or blank. It is blank by default,
which refers to any mode.
Mode Select a filtering mode: Discard or Permit.
Modify
Click to modify the corresponding IP filter rule.
Delete
Click to delete the corresponding IP filter rule.
3. Click Add.
—END OF STEPS—
SettingMACFilter
This section describes how to filter the prohibited MAC addresses.
Steps
1. Select Security > MAC Filter. The following page is displayed.

Table of Contents

Related product manuals