ZXV10 W615 User Manual
Confidential and Proprietary Information of ZTE CORPORATION 31
2. In the Network Card and Channel drop-down lists, select the network card
and channel to be scanned respectively.
Caution:
When the SSID is disabled or the WIDS mode is Access, this page
cannot be configured.
3. Click Scan. The scan result is displayed on the refreshed page.
—END OF STEPS—
Setting WDS
This section describes how to set WDS.
Steps
1. Select Network > WLAN > WDS. The following page is displayed.
To Next Page
Loading...
