ZXV10 W615 User Manual
72 Confidential and Proprietary Information of ZTE CORPORATION
Steps
1. Select Administration > SNMPv3 Access Control (VACM) > Security
To Group. The following page is displayed.
2. Configure the parameters. Refer to the following table.
Parameter Description
Security
Model
Supports USM, SNMPv1, and SNMPv2c.
Security Name Supports nanpuser,anpuser,apuser.
Group Name Specifies the group name.
Modify
Click
to modify the corresponding security group information.
Delete
Click to delete the corresponding security group information.
3. Click Add.
—END OF STEPS—
Managing View Subtree
This section describes how to configure the view subtree.
Steps
1. Select Adminsitration > SNMPv3 Access Control (VACM) > View Tree
Family. The following page is displayed.
To Next Page
Loading...
