AT&T Velocity – User Guide – Prepaid AT&T Velocity – User Guide – Prepaid
Connect to the Internet
When your mobile hotspot is powered on, it automatically
searches for and connects to your network provider’s mobile
broadband network.
Connect your computer or other devices to your network.
a) Use the Wi-Fi application on your computer or other
wireless devices to search for the available wireless network.
b) Select the Wi-Fi network name displayed on the mobile
hotspot screen, and then click Connect.
c) Input the Wi-Fi network password, which is located on the
mobile hotspot home screen, and click Next.
11Get StartedGet Started10
d) If prompted, choose whether you want to turn on sharing
between PCs or connecting to devices on the network.
Launch your browser to surf the Internet.
Connect Devices to Your Mobile Hotspot’s Wi-Fi
You can connect up to 10 wireless devices such as
smartphones, laptops, tablets, digital cameras, printers, gaming
consoles, and digital picture frames to your mobile hotspot’s
Wi-Fi network(s). (See Set Maximum Number of Connected
Devices on page 18 for instructions on setting connections for
the Main Wi-Fi and Guest Wi-Fi networks.)
You can connect:
• A wireless device to your Wi-Fi network by typing the Wi-Fi
password.
• A WPS-enabled wireless device by pressing the WPS buttons
on the mobile hotspot and the wireless device.
Note: You can also connect a single device directly to the
hotspot using the USB cable.
Connect a Wireless Device Manually
To connect a wireless device to your mobile hotspot’s Wi-Fi
network, see Connect to the Internet on page 10.
Connect a WPS-Enabled Wireless Device
If your wireless device supports WPS, you don’t have to input
the password manually to connect to the mobile hotspot.
To Next Page
Loading...
