Zte AT&T Velocity MF923 - Set Up and Connect to the Internet; Connect to the Internet

Set Up and Connect to the Internet
Install the Battery
Remove the back cover.
Insert the battery as shown with
the contacts located against
the metal springs, and press the
battery down into the case.
Replace the back cover.
Note: The battery comes partially charged and ready to go.
When the battery needs recharging, follow the instructions in
Recharge the Battery on page 31.
9Get StartedGet Started8
Connect to the Internet
When your mobile hotspot is powered on, it automatically
searches for and connects to your network provider’s mobile
broadband network.
Connect your computer or other devices to your network.
a) Use the Wi-Fi application on your computer or other
wireless devices to search for the available wireless
network.
b) Select the Wi-Fi network name displayed on the mobile
hotspot screen, and then click Connect.
AT&T Velocity – User Guide – Postpaid AT&T Velocity – User Guide – Postpaid