90
2. Aim the camera at the subject. You can touch any area on the screen that you
want the camcorder to focus on before and during recording.
NOTE:
You can spread or pinch on the screen to zoom in or out before and during
recording.
3. Touch
to start recording. You can also touch / to pause or
resume recording.
NOTE:
While the recording is in progress, you can touch
to save the frame as
a separate photo.
4. Touch
to stop recording.
Customising camera/camcorder settings
Before capturing a photo or a video, you can touch to open the following
camera and camcorder setting options.
NOTE:
Some camera and video options will change according to different camera modes.
CAMERA
Picture size: Set the image size for your photo.
Full screen: Set the viewfinder screen as full screen or not when the back
camera is in use.
Point-and-shoot: Available for the front camera. When this feature is
enabled, you can touch the viewfinder screen to take a photo using the
front camera.
Shutter sound: Turn on or off the shutter sound.
To Next Page
Loading...
