Zte Blade A7S 2020-T - Connectivity; Mobile Network and Wi-Fi

24
Unpin the Screen
Follow instructions on screen to Unpin the screen.
Connecting to Mobile Network
Set Access Point Names
To connect to the Internet, you can use the default Access
Point Names (APN). And if you want to add a new APN,
please contact the service provider to get the necessary
information.
1. Swipe up from the home screen and touch Settings >
Network & Internet > Access point names
2. Telstra APN’s are set by default and there is no need to
change these settings. Press + to create a new APN if
required when switching operators.
3. Touch each item to enter the information you get from
your service provider.
4. Touch > Save to complete.
NOTE:
To set the APN to default settings, on the APNs screen
touch > Reset to default.