Zte Blade V50S - Connecting to Your Computer via USB

28
 Swipe down from the status bar to open the notification panel
and drag the panel downwards. Touch Ring, Vibrate, or
Silent to switch the phone to vibration or silent mode or turn
on the sound.
 Open Settings and touch Sound and vibration, and then
select Vibrate or Silent to switch to vibration or silent mode.
Using Do Not Disturb Mode
You ca n si le nc e yo ur ph one wi th Do No t Di st ur b m ode an d s et an
automatic schedule for Do Not Disturb mode.
Turn On or Off Do Not Disturb Mode
1. Open Settings and touch Sound and vibration > Do Not
Disturb.
2. Switch Turn on now on or off.
Set the Exceptions for Do Not Disturb Mode
1. Open Settings and touch Sound and vibration > Do Not
Disturb.
2. Select the following options and choose what to allow.
 Allow messages from: Allow messages from anyone,
contacts, or starred contacts, or block all message
notifications.
 Allow calls from: Allow calls from anyone, contacts, or
starred contacts, or block all call notifications.
 Repeat callers: Allow the phone to ring if the same
person calls repeatedly within a 15 minutes period.