EasyManua.ls Logo

Zte Blade V50S - Mobile Data Usage

Zte Blade V50S
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54
NOTE:
To set the APN to default settings, touch > Reset to default.
Connecting to Wi-Fi
Wi-Fi is a wireless networking technology that can provide
Internet access at distances of up to 100 meters, depending on
the Wi-Fi router and your surroundings.
To turn Wi-Fi on and connect to a Wi-Fi network:
1. Open Settings and touch Wi-Fi.
2. Slide the Use Wi-Fi switch to the on position to turn on Wi-Fi.
3. Touch a Wi-Fi network name to connect to it.
4. If the network is secured, enter the password and touch
CONNECT.
NOTES:
If you have a QR code of the Wi-Fi network, touch at
the top right to scan the code and connect.
Your phone supports 2.4 GHz and 5 GHz Wi-Fi.
Your phone automatically connects to previously used Wi-Fi
networks when they are in range.

Table of Contents

Related product manuals