Zte blade V8 PRO - Using Wi-Fi Direct

60
 Wi-Fi Direct: Use the Wi-Fi Direct feature. See Using
Wi-Fi Direct
®
.
 WPS Push Button: Connect to a WPS network via the
push button method.
 WPS Pin Entry: Connect to a WPS network via the
phone PIN method.
 MAC address: Check the MAC address.
 IP address: Check the phone’s IP address.
Using Wi-Fi Direct
®
Wi-Fi Direct allows Wi-Fi devices to share files and data directly
by connecting to each other without the need for wireless access
points (hotspots).
To connect via Wi-Fi Direct:
1. Press the Home key > > Settings > All settings > Wi-Fi.
2. If Wi-Fi is off, slide the Wi-Fi switch to turn it on.
3. Touch > Advanced > Wi-Fi Direct. Your phone will search
for other devices enabled with Wi-Fi Direct connections.
4. Touch a device name below Peer devices to connect with it.
The other device will receive a connection prompt and need
to accept the request for connection. Both devices may need
to enter a common PIN.
5. Once connected the device is displayed as “Connected” in
the Peer devices list.