84
NOTE:
Please contact the service provider to check whether the call
waiting feature is available.
Set Sound and Vibration
Set the sound and vibration for incoming calls as well as dialpad
sounds.
1. Press the Home key > > > Call settings >
Ringtone and keypad sound.
2. Touch the option you want to configure.
Touch a nano-SIM card name to select the ringtone for
incoming calls to that card.
Touch Dialpad touch sounds to select the sound played
when you touch the dialpad keys. Touch the switch on the
right to turn on or off this feature.
Check Vibrate when ringing to enable vibration for
incoming call notification.
Set DTMF Tones
You can set the length of Dual-tone multi-frequency (DTMF)
signal tones.
1. Press the Home key > > > Call settings > DTMF
tones.
2. Touch Normal or Long.
To Next Page
Loading...
