How to unlock Zte Cell Phone PIN Code blocked?
If your Zte Cell Phone's PIN code is blocked, it's because you've entered the incorrect PIN code three consecutive times. Contact your service provider. If they provide the nano-SIM card’s PUK code, use it to unlock the nano-SIM card.
What to do if my Zte BLADE X battery is not charging?
If your Zte Cell Phone battery isn't charging, it could be due to several reasons. The battery or charger might be damaged, in which case, contact the dealer. The phone’s temperature might be too low (below 32°F/0°C) or too high (above 113°F/45°C); adjust the charging environment to avoid extreme temperatures. Also, check the connection between the battery and charger to ensure they are properly connected.
What to do if I cannot turn on my Zte BLADE X?
If you cannot turn on your Zte Cell Phone, the battery power has likely been depleted. Recharge the phone’s battery.
Why does my Zte BLADE X Cell Phone have poor reception?
Poor reception on your Zte Cell Phone can occur for several reasons. The network signal may be weak at your current location, such as in a basement or near a tall building. Move to a location where the network signal can be properly received. Alternatively, the network might be busy, especially during peak times. Avoid using the phone at such times, or try again after waiting a short time. Finally, you might be too far away from a base station. You can request a service area map from your service provider.
What to do if my Zte BLADE X has shortened standby time?
Shortened standby time on your Zte Cell Phone can be influenced by several factors. The standby time depends on your service provider's system configuration. If you are in an area with a weak signal, temporarily power off the phone. If the battery is depleted or exposed to high temperatures, its life will be shortened, in that case, contact the dealer to change the battery. If you cannot connect to the network, the phone will continue searching for a base station, consuming battery power. Change your location to one with network access, or turn off the phone temporarily.
What to do if my Zte Cell Phone shows a Nano-SIM card error?
If your Zte Cell Phone displays a nano-SIM card error, the card may be malfunctioning or damaged. Take the nano-SIM card to your service provider for testing. The nano-SIM card might also be inserted improperly; ensure it is correctly inserted. Debris on the nano-SIM card contacts can also cause this issue; use a soft, dry cloth to clean the contacts.
What to do if I am unable to connect to the network with my Zte BLADE X Cell Phone?
If you're unable to connect to the network with your Zte Cell Phone, the nano-SIM card may be invalid. Contact your service provider. You might also be outside the network’s service area; check with your service provider. If the signal is poor, move to an open space or closer to a window.
Why does my Zte BLADE X Cell Phone have echo or noise during calls?
Echo or noise during calls on your Zte Cell Phone can be due to poor network link quality from your service provider or poor local telephone line quality. End the call and dial again to be switched to a better-quality network link or phone line.
Why can't I select certain features on my Zte BLADE X Cell Phone?
If you are unable to select certain features on your Zte Cell Phone, it is because your service provider does not support these features, or you have not applied for services that provide these features. Contact your service provider.
Instructions for inserting SIM and microSDXC cards into the phone's tray.
How to connect the charger and charge the phone's battery.
Steps to turn the phone on, turn it off, and restart it.
Guide for setting up the phone for the first time after purchase or reset.
How to lock the phone for security and turn the screen back on.
Setting up pattern, PIN, password, or disabling screen lock.
Steps to register fingerprints for unlocking or app access.
How to enable screen pinning to keep an app visible.
Controlling mobile data, roaming, and network configurations.
Turning Wi-Fi on/off, connecting to networks, and adding new ones.
Steps to pair the phone with other Bluetooth devices.
Configuring Wi-Fi, Bluetooth, mobile networks, and hotspot settings.
Setting up various screen lock types for phone security.
Registering and using fingerprints for unlocking and app access.
Important safety precautions for using the phone.
Information on SAR levels and FCC compliance for RF exposure.
Warnings about using the phone while driving.
General terms and conditions of the limited warranty.
Specific warranty coverage and limitations for end-users.
Information and steps for obtaining warranty service.
General| Announced | 2017, May |
|---|---|
| Network Technology | GSM / HSPA / LTE |
| Chipset | Qualcomm MSM8917 Snapdragon 425 (28 nm) |
| CPU | Quad-core 1.4 GHz Cortex-A53 |
| GPU | Adreno 308 |
| Memory Card slot | microSDXC (dedicated slot) |
| Internal Memory | 16GB 2GB RAM |
| Main Camera Video | 1080p@30fps |
| Loudspeaker | Yes |
| 3.5mm jack | Yes |
| GPS | Yes, with A-GPS |
| Radio | FM radio |
| USB | microUSB 2.0 |
| Battery Type | Li-Ion 3000 mAh, non-removable |
| Colors | Black |
| Launch Date | 2017, May |
| SIM | Nano-SIM |
| Display Type | IPS LCD |
| Display Size | 5.5 inches |
| Display Resolution | 720 x 1280 pixels (~267 ppi density) |
| Main Camera | 13 MP, AF |
| Main Camera Features | LED flash, HDR, panorama |
| Selfie Camera | 5 MP |
| WLAN | Wi-Fi 802.11 b/g/n, hotspot |
| Sensors | Accelerometer, proximity |
| Bluetooth | A2DP |
To Next Page
