15
Note: For maximum battery performance, it is recommended that you completely charge
the battery before using the phone for the rst time. A new battery’s full performance is
achieved only after three complete charge and discharge cycles.
1
2
1. Pull the rubber USB cover out of the USB port and move it out of the way.
2. Plug the USB data cable into the phone's USB Charger Port (as shown in the above il-
lustration) and the wall adapter end into an electrical outlet.
Removing the Battery
If you need to remove your phone’s battery, please turn the phone off and follow the proce-
dure indicated below:
1 2 3
To Next Page
Loading...
