EasyManua.ls Logo

Zte HSDPA USB modem - Connecting your USB modem and computer; Installing the USB modem software; Mac Software Installation; Disconnecting the USB modem

Zte HSDPA USB modem
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Whenyou’reconnectedtotheinternet,
thelightonthemodemwillbegreen.
Ifitshowsred,you’renotconnected.
BeforeyoutryanduseyourUSB
modem,you’llneedtomakesure
thatyourcomputeristurnedoff.
ThenconnecttheUSBmodemtothe
USBport(usingthecablesupplied)
andturnyourcomputeron.
Connecting your USB modem and computer. Installing the USB modem software.
Onceyouturnyourcomputeron,thesoftwarewillautomaticallyinstallitself.You’llrst
seeanewiconinthestatusbar(seebelow)andthisshowsthattheUSBmodemand
computerhavebeenconnectedwithoutanyproblems.
Afterafewseconds,theinstallationwillautomaticallycontinue.Thenjustfollow
theon-screeninstructionsandwaituntilyoucanstartusingthemobileinternet.
If you own a Mac
IfyouownaMac,you’llneedtoinstallthesoftwareusingtheCDthatcamewith
thispack.AllyouneedtodoisinserttheCDintoyourdiskdriveandfollowthe
on-screeninstructions.
Disconnecting the USB modem
TomakesurethatyourremovetheUSBmodemsafely,pleasedisconnectinthe
correctway.Forexample,MicrosoftWindowsusersneedtorightclickonthe
iconinthestatusbar,andselectSafelyRemoveHardware.Followtheon-screen
promptsuntilyou’retoldthatit’ssafetoremovetheUSBmodem.
4 5
40476 ZTE Datamodem UG.aw3.indd 3 1/11/07 12:52:47

Related product manuals