Zte MC801A - Indicator Lights and Interfaces

11
1.
SIGNAL
(Threelights)
On:Threelightsshowthesignalstrength.Morelightsonmeans
bettersignals.
O󰀨:Thereisnosignalornonano-SIMcardinserted.
2.
NETWORK
Red:Thedeviceispoweredonbutnotregisteredtothemobile
network.
Bluesolid:Thedeviceisregisteredorconnectedtothe3G/4Gmobile
network.
Whitesolid:Thedeviceisregisteredorconnectedtothe5Gnetwork.
3.
WIFI
On:WLAN(Wi-Fi)worksnormally.
Blinking:WPSisactivating.
O󰀨:WLAN(Wi-Fi)iso󰀨.
4.
POWER
On:Thedeviceispoweredon.
O󰀨:Thedeviceispoweredo󰀨.
5.
WPSkey PressthiskeytoactivatetheWPSfunction.
6.
Externalantenna
port
Connecttoexternalantennas.TheantennaconnectortypeisTS-9
andantennafrequencyrangeisfrom700MHzto4200MHz.
7.
PHONEport Thisportisnotactiveandcannotbeused.
8.
LANports
LAN1port:ConnecttotheWANintheCableBroadbandMode.
LAN2port:ConnecttoaPC.
9.
Powerport Connecttothepoweradapter.
10.
nano-SIMcard
slotandreset
hole
Insertyournano-SIMcard.
Resethole:Pressandholdforabout3secondstorestoreyour
devicetothefactorysettings.