Zte MF58 - User Entry

ZTE MF58
26
When the call connects, the screen will prompt you to enter a PIN code. A “beep” sound
from the Mobile Cam indicates that the number has been successfully added to the white
list (the beep sound can be turned off by SMS command). If you make 3 consecutive
incorrect PIN code entries, or have not been able to enter the PIN code within 60 seconds,
the Mobile Cam will be disconnected automatically. If the PIN code is valid, the user will
enter the video call interface.
The AD can also set the other user number via the video phone menu or SMS commands
(see Section 4.1, 4.2). AD can also set validation for non-white list users (see Chapter 5).
User entry
White list user: Phone numbers added to white list (including AD number). The white list
user can dial the mobile camera without the need to input a PIN (this function depends on
AD setting).
Non-white list user: If the white list is not full, and the non-white list user dials up the Mobile
Cam using the correct PIN code, the caller’s phone number will be added to the white list
automatically. If the number of phone numbers in the white list has reached 20, the Mobile
Cam will refuse to accept non-white list users (this function depends on AD settings).
This Manual: http://www.manuallib.com/file/2593400