Zte MF58 - Operation Modes and User Validation

ZTE MF58
41
6 Infrared/daylight Operation Modes and
Non-white List User Validation Function
The Mobile Cam has two operation modes – daylight mode and infrared mode. In the
infrared mode, it turns on infrared spotlight. If the switch of infrared mode is on (please refer
to Section 4.2) and the light is weak (less than 20 LUX), the Mobile Cam will shut down
daylight mode and start infrared mode automatically. Vice versa, when light is bright (more
than 20 LUX), the Mobile Cam will switch from infrared mode to daylight mode. If the switch
of infrared mode is off, the Mobile Cam will always run in the daylight mode.
Special video call processing modes under the non-white list user validation function:
If there is an incoming call whose number isn’t displayed (caller maybe roaming or the
caller switched off the function of indicating calling number), or whose number exceeds 20
digits, or the white list is full and the number isn’t in the white list, the Mobile Cam will
validate the user as follow:
1) When the switch of the validation of non-white list user is set as “on”, the Mobile Cam
This Manual: http://www.manuallib.com/file/2593400