ZTE MF58
40
Note:
1) SMS commands can only be sent by the administrator’s mobile phone number. The
administrator will not be recognized by the Mobile Cam if a command is sent from another
mobile phone number.
2) All commands can be in lower-case or upper-case letters
3) Command explanation
[number]Indicates a valid mobile phone number. The phone number’s maximum length is
20 digits . ( “+” will be ignored) .
[pin]Indicates user PIN code. It should be in 4 digits.
[newpin]Indicates new user PIN code. It should be in 4 digits.
[oldnumber]Indicates old administrator number
[newnumber]Indicates new administrator number
|Indicates “or”
[yyyymmddhhmm]Indicates year, month, day, hour, minute. For example: 12:30, May 1,
2006 is displayed as 200605011230.
Note:
Please use a 3G mobile phone to make sure the SMS center number in your SIM/USIM
card is correct.
This Manual: http://www.manuallib.com/file/2593400
To Next Page
Loading...