7 8
Indicator Lights and Interfaces
1
WPS key
Press and hold for 3 seconds to activate the
WPS function.
2
Power key
Press and hold for about 3 seconds to power
on/o your device.
3
Network
Red: The device is in error status.
y
The device is not registered to the
mobile network.
y
There is no nano-SIM card inserted.
y
There is no network service available.
Green solid: The device is registered to the
3G mobile network.
Green blinking: The device is connected to
the 3G mobile network and data is being
transferred.
White solid: The device is registered to the
4G LTE network.
White blinking: The device is connected
to the 4G LTE network and data is being
transferred.
4
Wi-Fi
White solid: Wi-Fi is active.
White blinking: WPS is active.
O: Wi-Fi is o.
5
Battery
Red solid/blinking: The battery is low. Please
charge the battery.
White blinking: The battery is being charged.
White solid: The battery level is middle or
high.
O: The battery isn’t inserted. Your device is
powered o and not being charged.
To Next Page
Loading...
