110
Brightness: Adjust projection brightness.
Color correction: Adjust projection color.
Mode:
Source: Turn on HDMI or Miracast as the projection
source.
LABB: Enable or disable the Local Area Brightness
Boost feature or adjust its level. The projector can
adaptively gain up regions of an image that are dim
relative to the average picture level.
CAIC: Enable or disable the Content-Adaptive
Illumination Control feature. The projector can
automatically adjust illumination power to consume less
battery while maintaining constant image brightness.
Control:
Projector: Turn on or off the projector.
Gesture switch: After this feature is enabled, you can
swipe up or down using THREE fingers on the screen to
turn on or off the projector when MF97G’s screen is
turned on.
Remote controller: Enable this feature before using the
remote control app in your Android phone to control
MF97G. See Remote Control.
Eyes protection: This feature allows MF97G to lower
projection brightness automatically when MF97G
detects its own quick movement.
To Next Page
Loading...
