69 - Tools and Google Calendar
5. When you see the name of your headset
displayed in the Available devices
section, touch the name. Your phone then
automatically tries to pair with the
headset.
6. If automatic pairing fails, enter the
passcode supplied with your headset.
The pairing and connection status is
displayed below the hands-free headset or
car kit name. When the Bluetooth headset or
car kit is connected to your phone, the
Bluetooth icon is displayed in the status
bar. Depending on the type of headset or car
kit you have connected, you can then start
using the headset or car kit to listen to music
or make and receive phone calls.
NOTE:
Due to different specifications and features of
other Bluetooth-compatible devices, display
and operations may be different, and
functions such as transfer or exchange may
not be possible with all Bluetooth-compatible
devices.
Disconnect from a Bluetooth
Device
You can manually disconnect from a
Bluetooth device through the Bluetooth
settings menu.
1. From the home screen, touch >
Settings
> Bluetooth.
2. In the Paired devices section, touch the
icon beside the Bluetooth device you
want to forget.
3. Touch FORGET.
microSDHC Card
A microSDHC™ card is an optional accessory
that allows you to store images, videos, music,
documents, and voice data on your phone.
Remove a microSDHC Card
1. Turn the phone off.
2. Find the notch on the lower left side of the
back cover. Use your fingernail to open
the back cover and lift it up gently.
3. Remove the battery.
4. Gently pull the microSDHC card out from
the slot.
5. Replace the battery and the back cover.
NOTE:
You can easily damage the microSDHC card
by improper operation. Please be careful
when inserting, removing, or handling the
microSDHC card.
NOTE:
Make sure your battery is fully charged before
using the microSDHC card. Your data may
become damaged or unusable if the battery
runs out while using the microSDHC card.
To Next Page
Loading...
