5
Inserting the SIM Card
• Insert the end of the eject tool into the hole of
the card tray and press firmly until the tray
pops out.
• Put one or two Nano-SIM cards into the tray.
• Push the card tray back into the phone.
Note: Dimensions of a Nano-SIM card: 9×12 mm.
Charging the Battery
Connect the phone to the power adapter using the
included USB cable and power adapter.
Note: Your phone and power adapter might heat up
while charging. Use of other USB cable or power
adapter might decrease the life span of your phone or
cause fire, explosion, and other hazards.
The illustrations of products and accessories in the user guide are all
schematic diagrams and are for reference only. Due to product
updates and upgrades, the actual product and the schematic
diagram may be slightly different, please refer to the actual product.
To Next Page
Loading...
