User manual S226
21
End/Power key
Press to exit to the standby mode.
Hold to switch on/off the phone.
QWERTY keyboard
Press to enter characters 0-9 and the alphabets from a-z.
Note: In this User Manual, “press a key” means to press the key and
release it, while “hold a key” means to press the key for at least two
seconds and then release it.
Lock / Unlock the Keypad
In the standby mode, hold the Space key for about two seconds to lock
the keypad.To unlock the keypad, press Left soft key and then press
Space key within two seconds to unlock the kepad.Locking the keypad
can prevent unintentional operations on it. You can answer an incoming
call with the regular operation when the keypad is locked.
Interface icons
To Next Page
Loading...
