Zte Blade Spark AT&T - User Manual

Questions and Answers

D
Dr. Clifford DavisAug 14, 2025
What to do if my Zte Blade Spark AT&T Cell Phone battery is not charging?
- J
  Jacqueline HallAug 14, 2025
  If your Zte Cell Phone battery isn't charging, it could be due to a damaged battery or charger. Contact the dealer in this case. Also, extreme temperatures can prevent charging, so adjust the charging environment to avoid temperatures below 32°F (0°C) or above 113°F (45°C). Finally, check all connectors to ensure they are properly connected, as poor contact can also be the cause.
R
Richard BassAug 17, 2025
What to do if my Zte Blade Spark AT&T keeps crashing and rebooting?
- R
  Roger SmithAug 17, 2025
  If your Zte Cell Phone crashes, reboots, freezes, or won't power on, it might be due to incompatible third-party software. Reset the phone to factory status. You can also try uninstalling the software that may be causing the problem, or upgrade the phone software.
T
Timothy HicksAug 20, 2025
What causes a nano-SIM card error on my Zte Cell Phone?
- H
  hsawyerAug 20, 2025
  A nano-SIM card error on your Zte Cell Phone can occur if the card has malfunctioned or is damaged. Take the nano-SIM card to your service provider for testing. It could also be inserted improperly, so ensure it is correctly inserted. Debris on the nano-SIM card contacts can also cause this error; use a soft, dry cloth to clean the contacts.
Z
zandersonAug 25, 2025
What to do if my Zte Blade Spark AT&T PIN Code is blocked?
- T
  travisgrantAug 25, 2025
  If your Zte Cell Phone PIN code is blocked, it means that you have entered an incorrect PIN code three consecutive times. Contact your service provider.
A
Ashley DavisAug 27, 2025
Why does my Zte Cell Phone have poor reception?
- W
  wardwesleyAug 27, 2025
  Poor reception on your Zte Cell Phone can occur if the network signal is weak due to your location (e.g., basement, near tall buildings). Move to a location where the network signal can be properly received. It can also happen if the network is busy. Avoid using the phone at peak times, or try again after waiting. If you are too far from a base station, request a service area map from your service provider.
J
Jeffery SmithAug 30, 2025
Why is my Zte Blade Spark AT&T unable to connect to the network?
- M
  Megan PerkinsAug 31, 2025
  If your Zte Cell Phone is unable to connect to the network, the nano-SIM card might be invalid. Contact your service provider to resolve this. You might also be outside the network’s service area, so check with your service provider. Poor signal strength can also cause this issue; move to an open space or closer to a window.
M
michael95Sep 3, 2025
Why does my Zte Cell Phone have shortened standby time?
- R
  Rebecca RobertsonSep 3, 2025
  Shortened standby time on your Zte Cell Phone can be related to your service provider's system configuration. If you are in an area with a weak signal, temporarily power off the phone. A depleted battery or high temperatures can also shorten battery life, so use a new battery if needed. If the phone struggles to connect to the network, it will consume battery, so move to an area with network access or turn off the phone temporarily.
R
Richard WhiteSep 6, 2025
Why is there echo or noise on my Zte Blade Spark AT&T Cell Phone calls?
- D
  Danielle SmithSep 6, 2025
  Echo or noise during calls on your Zte Cell Phone can be due to poor network link quality from your service provider or poor local telephone line quality. End the call and dial again; this may switch you to a better-quality network link or phone line.
J
James WilliamsSep 9, 2025
Why am I unable to select certain features on my Zte Blade Spark AT&T Cell Phone?
- J
  jessica94Sep 10, 2025
  If you are unable to select certain features on your Zte Cell Phone, it is possible that your service provider does not support these features, or you have not applied for services that provide these features. Contact your service provider.

Summary

Getting Started

Installing the Nano-SIM Card and microSDXC Card

Install the nano-SIM and microSDXC cards into the phone's tray.

Charging the Battery

How to connect the charger and charge the phone's battery.

Personalizing

Protecting Your Phone With Screen Locks

Set up a screen lock (Pattern, PIN, or Password) to secure your phone.

Using Your Fingerprint

Connecting to Networks and Devices

Connecting to Wi-Fi

Turn Wi-Fi on/off, connect to networks, and forget saved networks.

Connecting to Bluetooth Devices

Sharing Your Mobile Data Connection

Share your phone's internet via USB, Bluetooth, or Wi-Fi hotspot.

Phone Calls

Placing and Ending Calls

Answering or Rejecting Calls

Adjusting Your Call Settings

Contacts

Adding a New Contact

Editing Contacts

Email

Setting Up the First Email Account

Configure your email account to send and receive messages.

Camera

Capturing a Photo

Recording a Video

Settings

Wireless & Networks

Device

Display

Notifications

Security

Set screen lock, fingerprint, and Smart Lock for phone security.

Backup & Reset

Troubleshooting

Poor reception

Battery not charging

Troubleshoot issues when the phone battery does not charge.

Health and Safety Information

General Safety Information

Important safety guidelines for using the phone.

FCC RF Exposure Information (SAR)

FCC Regulations

Emergency Calls

Radio Frequency Interference

Warranty

Limited Warranty

Details of the product's limited warranty terms and coverage.

Specifications

Zte Blade Spark AT&T Specifications

General

Announced	2017, May
SIM	Nano-SIM
Display Type	IPS LCD
Pixel Density	267 ppi
CPU	Octa-core 1.4 GHz Cortex-A53
GPU	Adreno 505
Card slot	microSDXC (dedicated slot)
Internal Storage	16 GB
RAM	2 GB
Main Camera	13 MP, AF
Main Camera Features	LED flash, panorama, HDR
Main Camera Video	1080p@30fps
Selfie camera	5 MP
Loudspeaker	Yes
3.5mm jack	Yes
Bluetooth	4.2, A2DP, LE
GPS	Yes, with A-GPS
Radio	FM radio
USB	microUSB 2.0
Sensors	Accelerometer, proximity
Colors	Black
Network	GSM / HSPA / LTE
Resolution	720 x 1280 pixels
WLAN	Wi-Fi 802.11 b/g/n, Wi-Fi Direct
Display Size	5.5 inches
Operating System	Android 7.1 (Nougat)
Chipset	Qualcomm MSM8940 Snapdragon 435 (28 nm)