Zte Blade Spark AT&T - Adjusting Volumes; Switching to Silent or Vibration Mode; Using Do Not Disturb Mode

18 19
Adjusting Volumes
1. From the home screen, tap Settings Sound.
2. Drag the sliders below Media volume, Alarm volume, Ring
volume, and Notication volume to adjust the volume for
each type of audio.
Note: You can adjust the media volume when a media application
is in use by pressing the Volume key. If no media application is
active, press the Volume key to adjust ringtone volume (or the
earpiece volume during a call).
Switching to Silent or Vibration Mode
You can set the phone to silent mode by using one of the
following methods.
• Press the Volume key when no media application is active to
show the volume management window. Drag the slider to
the le or press and hold the lower end of the Volume key
to switch the phone to vibration mode. Press down on the
Volume key again in vibration mode to switch the phone to
silent mode.
• From the home screen, tap
Settings Sound
Notication mode and select Vibrate or Mute to switch to
vibration or silent mode.
Note: Silent and vibration modes will not silence your
alarm sound.
Using Do Not Disturb Mode
You can limit interruptions with Do not disturb mode. This mode
silences your phone so that it doesn’t make sounds or vibrate
when you don’t want it to.
1. From the home screen, tap
Settings Sound Do
not disturb.
2. Tap Do not disturb and select On or Scheduled as you need.
• Tap On to turn on Do not disturb mode immediately. It will
remain on until you turn it o.
• Tap Scheduled to select time periods for Do not disturb
mode to be turned on automatically.
3. Set the detailed settings.
• If you have selected Scheduled, tap Days, Start time, and
End time to specify the time periods during which Do not
disturb mode is on.
• Tap Disturb rules to choose whether you’d like to allow
certain notications or not.
– Priority only: Only notications you have marked as
priority are allowed.
– Alarms only: Only alarms are allowed.
– Total silence: No notications are allowed.
• If you have selected Priority only, you can customize
the types of allowed sounds or vibrations under Priority
interruptions. Tap the switches next to the items you want
to allow. Tap Messages or Calls to set preferences for which
messages and calls will be allowed.
PERSONALIZINGPERSONALIZING