If the battery is low, there will be a pop-up message on the
screen. As you charge your phone, the screen will show you the
exact battery level on the Status Bar.
This device contains a nonremovable battery. Attempting
to remove will void your warranty and could cause serious
injury. Do not damage, alter, or try to remove the battery.
Warning! Use only ZTE-approved chargers and cables. The use of
unapproved accessories could damage your phone or cause the
battery to explode.
Caution: Do not attempt to change the built-in rechargeable
battery yourself. The battery can only be changed by ZTE or a
ZTE-authorized service provider.
Note: Use the USB Type-C™ charger that
comes in-box with your phone to charge
the battery.
1. Connect the adapter to the charging port.
2. Connect the charger to a standard AC wall
outlet. If the phone is on, you’ll see a charging
icon, such as
or , appear in the Status Bar.
3. Disconnect the charger when the battery is
fully charged.
Note: If the battery is extremely low, you may be unable to power
on the phone even when it is being charged. In this case, try
again aer charging the phone for at least 20 minutes. Contact
customer service if you still cannot power on the phone aer
prolonged charging.
8 9GETTING STARTEDGETTING STARTED
Extending the Battery Life
Active applications, screen brightness levels, Bluetooth and Wi-Fi
usage, and GPS functionality can drain your battery. You can
follow the helpful tips below to conserve your battery power:
• Reduce the screen backlight time.
• Lower the screen brightness.
• Turn auto-sync, Wi-Fi, and Bluetooth o when not in use.
• Disable the GPS function when not in use. Most applications
using this function will periodically query the GPS satellites for
your current location; each query drains your battery.
Powering Your Phone On/O
• Press and hold the Power key to power on your phone.
• To turn it o, press and hold the Power key to open the
options menu. Tap Power o.
Note: If the phone freezes or takes too long to respond, press and
hold the Power key for about 10 seconds to restart the phone.
Setting Up Your Phone for the First Time
When you rst power on your phone aer you purchase it or
reset it to factory settings (see Settings – Personal – Backup &
Reset), you will need to set it up before using it.
Tap the language eld to select a language. Then tap LET’S GO
and follow the prompts to set up your Wi-Fi connection, Google
services, name, device protection, and other options.
Note: Users with low vision can tap Vision Settings on the initial
setup screen to customize accessibility features.
To Next Page
Loading...
