12
2. Use the Up/Down keys to view the message.
3. While the message is open, use Options to reply, delete, or forward the
message. You can also call back the sender.
Writing text
In text entry screens press the # key to change input modes:
Input Letters: press the corresponding letter keys to enter desired
characters. Note this does not work in numeric (123) mode.
Input Digits: In numeric (123) mode, press the keys to enter numbers.
Input Symbols: Press the * key to enter symbol mode. Use the
Navigation keys and then press the OK key to select.
Input a Space: Press the 0 key to input a space character. It does not work
in numeric (123) mode.
Delete: Press the CLR key to clear a character. Hold the CLR key to delete
all characters and clear the display.
Move Cursor to Left or Right: Press the Left/Right navigation keys to move
To Next Page
Loading...
