15
Bluetooth
First time you connect to a Bluetooth device you need to pair the device by
sharing a PIN between each device. Follow the steps below to pair devices:
1. Go to Menu > Settings > Connectivity > Bluetooth to turn Bluetooth on or
off.
2. When Bluetooth is on, the icon will appear in the status bar.
3. Go to My device > Search new device to search for Bluetooth-enabled
devices in close proximity.
4. Select the desired device in the list and press Pair.
5. Enter the PIN and press OK. When the opposite party enters the same PIN
the connection will be established. Default PIN’s are typically 0000 or 1234
but this can vary between devices so consult your other device user guide
to find the right PIN.
Note: Under Bluetooth Visibility: When your phone is set to visible with
Bluetooth on, all other Bluetooth-enabled devices within range can detect your
phone.
To Next Page
Loading...
