32
Navigating the Device
Slide the Power Switch to the ON position to
turn on the device. The screen lights up. After the
initialization of the device, the SSID and default
password will display on the screen. Press the OK
button, the following icons will appear:
NOTE: Devices and software are constantly evolv-
ing ā the screen images and icons displayed are for
reference only and may differ from your device.
When your Jetpack is roaming, it will remind you
that higher charges may be generated if you want
data access while roaming. Select Yes, and then
press the OK button to access the data connection.
Select No, and then press the OK button to refuse.
To Next Page
Loading...
