Connect the Device to a Phone
1. Unplug your phone from your home’s phone wall jack.
2. Plug your phone into the “Phone 1” port on the WF720,
using your existing phone cable or included phone cable.
NOTE: Put the device at least 2.5 meters away from the con-
nected phone, TV sets, radio and other electronic devices to
avoid electromagnetic interference.
DECT (Digital Enhanced Cordless Telecommunications)
Phone: To avoid electromagnetic interference between DECT
phone and the device, be sure the distance between DECT
phone and the device is 0.5 meter at least.
Turn on Your Device
1. Plug the power adapter into an electrical wall outlet.
2. Insert the small end of the power adapter into the Power
port on the back of your device.
3. Press and hold the power button about 8 seconds until the
signal strength light comes on.
5 6
To Next Page
Loading...
