Zte WF723CC - Using Your Device; Powering Your Device On and Off; Connecting to a Phone

• Replace n with 2 for VCO mode. Users who can talk, but cannot hear,
may use this mode to talk through the phone and receive responses
via text messages.
• Replace n with 3 for HCO mode. Users who can hear, but cannot talk,
may use this mode to listen to conversation of the other party and
respond via text messages.
PIN LOCK
Refer to the following table to check your nano-SIM card status, and
perform the corresponding action.
nano-SIM Status Battery Indicator Action
PIN Locked Green blinking
Enter PIN code and then the
“#” key.
PUK locked Yellow blinking
Enter PUK code, the “*” key,
new PIN, the “*” key again,
new PIN again, and then the
“#” key.
NOTE: When you enter a wrong PIN code 3 times, the nano-SIM card will
be PUK locked; when you enter a wrong PUK code 10 times, the nano-
SIM card will be permanently locked.
SPECIFICATIONS
DEVICE SPECIFICATIONS
Item Description
Model Name WF723CC
Dimensions 1.11 x 6.30 x 5.51 in
Weight Approx.385 g
Frequency 1.1 GHz
Technology Bands
Supported
FDD LTE: Band2/Band4/Band5/Band12
(with MFBI)/Band13
BATTERY SPECIFICATIONS
Item Description
Limited Charge Voltage 4.4 V
Type Lithium-ion
Capacity 2800 mAh
Continuous Talk Time Approx. 3 hours
Continuous Standby Time Approx. 12 hours
18 19
USING YOUR DEVICE