9
Connect the Z723EL to a phone
1. Unplug your phone from the home phone wall jack.
2. Plug your phone into the ‘PHONE 1’ port on the device through a phone
cable.
NOTE:
The “Phone 2” port can be used to connect an additional phone, or cordless base
station. All telephones connected to the Z723EL will use the same telephone
number.
Placing and Ending Calls
Place a Call by Dialing
1. Pick up the handset of the connected home phone.
2. Dial the phone number.
3. Press # or wait 4～8 seconds for the call to be connected automatically.
To Next Page
