Zte ZMAX - Initial Phone Setup and Operation

19
3. EdittheNetwork SSIDeldandthen
createanewNetworkSSIDname.
4. Touch Frequency bandeldtoselect
thefrequency.
5. Touch Channel eldtoselectthe
channel.
6. Verify the Security eldissettoWPA2
PSK.
7. Enteranewpasswordthenwriteit
down.
8. EnabletheBroadcast network
name(SSID)eldifyouwouldliketo
broadcastyourSSIDnametonearby
devices.
9. Touch Save to store the new settings.
10.ConrmtheMobileHotSpotactiveicon
appears at the top of the screen.
NOTE: By default, during the initial setup
process, the connection is not secure.
It is recommended that you maintain a
secure connection by using a password for
communication.