Zte ZXHN F660 - Qos Function; Multicast Function

ZXHN F660 Product Description
ZTE Confidential & Proprietary 17
 VLAN untagged mode, tagged mode and double tagged mode
 VLAN tag
 Adds S-Tag to the untagged or priority tagged frames from the user port as per
the needs.
 Adds C-Tag and S-Tag to the untagged or priority tagged frames from the user
port as per the needs.
4.6 QoS Function
 Service flow rate limit based on the user port, service flow, and GEM port
 Upstream service flow classification based on the physical port and source MAC
address, destination MAC address, VLAN ID, VLAN priority level (IEEE802.1D),
Ethernet type (such as IP, PPPoE, ARP/RARP), destination IP address, source IP
address, IP protocol type (TCP, UDP, ICMP, IGMP), IP DSCP, and TCP/UDP
 Ethernet priority level tagging of the upstream services based on the DSCP value
 Ingress rate limit
 Egress shaping
4.7 Multicast Function
 IGMP v1/v2 Snooping
 Multicast group per LAN port is 256
 Fast leave time, which is the time since user terminal sends an IGMP leave
message to the ONU equipment stops the multicast data packet, is less than 20ms.
 Support MVLAN